How To Adjust Mazda Clock

If you bought a new Mazda3 from us at Riley Mazda, there's a good chance that a member of our sales staff helped you calibrate the clock when you picked it up. In the event that you require further instruction, you are more than welcome to come to our dealership for assistance, or you can just follow the step-by-step advice that is provided below. In this section, we will discuss two distinct approaches to adjusting the time on your Mazda. The first one is designated as Type A, and the second one, which is the Mazda Connect infotainment system, is designated as Type B. If neither of the recommendations that follow appears to relate to the model of Mazda that you own, please refer to the owner's manual for your vehicle or get in touch with us here at Riley Mazda. You can use these instructions for any Mazda vehicle, including the Mazda3, Mazda6, MX-5, CX-3, CX-30,

Warning: You should never try to adjust the time on your clock while your vehicle is moving.

How to Adjust Mazda Clock

• To get started, press and hold the CLOCK button (also known as the FM/AM button) for around two seconds. A beep will sound to let you know that you can begin setting the time; in addition, the display will be blinking.
• To change the hour and the minute, press the H and M buttons (TUNE) on your remote.
• After you have completed everything, you should push the CLOCK button once more.
• Holding down the 00 buttons will bring you to the next available hour on the clock.

How to Adjust First-Generation Mazda Clock

• Choose Parameters from the menu that appears on the screen when you first log in.
• Choose the Clock tab when the following menu appears.
• Choose your settings for the clock.
• To make changes to the hours or the minutes, use the - or + buttons located directly below them.
• You can also do this by using the button that is specifically designed for that purpose, which is located in the bottom right corner of the screen. This function is only accessible when the time is displayed in 12-hour format.
• Utilize the Hour Format option, which is located in the Clock tab, to switch between the 12-hour mode and the 24-hour mode.

How to Change the Time on the Mazda Connect Infotainment Screen

• Choose your settings from the menu that appears on the home screen of your device. This is typically seen on the right side of the page.
• Pick the Clock option.
• Click the Adjust Time button.
• To make changes to the hour and minute, use the plus and minus buttons on the digital display. If the clock is set to a 12-hour display, pressing the am/pm button will cause it to transition from a.m. to p.m.
• If the clock is set to a 24-hour display (military time), and you wish to alter this, go back to the Clock configuration page and modify the Time Format.

Tips: The GPS Sync feature allows you to automatically synchronize your device's time with your current location.

As you can see, the process of determining how to adjust the clock on your Mazda is a straightforward one to complete. It is simply a matter of being aware of where the appropriate controls are located and being able to use them effectively. Do you still have questions about how to set the time on your brand-new Mazda? Please get in touch with Riley Mazda as soon as possible; we would be pleased to assist you.